New circuits · NAPIT approved · Worcester Park, KT4
New circuits and appliance wiring in Worcester Park
A new induction hob, a more powerful shower, a hot tub or a garden office all need the right supply behind them. We add new circuits, extra sockets and outdoor power for homes in Worcester Park, Ewell, Sutton, Banstead and Tadworth.
✓ Free quote
✓ Cookers, showers, hot tubs
✓ Certified
Approved, insured and local to KT4
AEI Electrical is run by Matthew Ayley, with Taylor on the team. Over more than ten years we’ve connected induction hobs, added sockets to bedrooms, run power out to summerhouses and garden offices, and fitted weatherproof sockets for homes across South London and Surrey.
NAPIT approved
Qualified inspectors
£2m insured
Public liability cover
5.0 on Google
100+ reviews
Based in Worcester Park
10+ years’ experience
What it is
What is a new circuit?
Every circuit in your home starts at a switch in the fuse board and feeds one job: the sockets downstairs, the lights upstairs, the cooker. A new circuit is a fresh cable from a spare way on the board to something that needs its own supply, such as an electric shower, an induction hob, a hot tub or a garden room.
Not every job needs one. An extra socket can often be added to a circuit you already have, as long as that circuit has the capacity and the right protection. Part of our job is telling you which is which before you pay for anything.
In England, a brand-new circuit has to be notified to building control. Adding a socket to an existing circuit doesn’t, unless it’s near a bath or shower, but it must still be wired and tested to the wiring regulations (BS 7671).
What you get
Power where you need it
You get a supply sized for the appliance, protected by the right breaker and RCD, and finished with a switch or isolator you can reach when you need to turn it off.
We test the work before we go. New circuits come with an Electrical Installation Certificate and are notified to building control for you; smaller additions come with paperwork to match.
1
Survey
2
Wire
3
Power up
Sound familiar?
Signs you need a new circuit or more sockets
Extension leads in every room
Adaptors and multi-way leads doing the job sockets should.
An induction hob on order
Most full-size hobs need more than a plug can give.
A shower upgrade planned
A more powerful shower may need a bigger cable.
A garden room with no power
Summerhouses, sheds and offices that need a proper supply.
A hot tub on its way
Hard-wired tubs need their own circuit and isolator.
Nowhere to plug in outside
Mowers and pressure washers run on leads through a window.
Who we wire new circuits for
Most of these jobs start with something new arriving: an appliance, a room, or a new way of using the house.
Kitchen upgrades
Swapping gas for an induction hob, adding a range cooker, or wanting more sockets along the worktop.
Bathroom upgrades
A new or more powerful electric shower, which needs its own circuit from the fuse board.
Gardens and outbuildings
Outdoor sockets, power to a shed, garage or garden room, and supplies for hot tubs and gates.
Home offices and rentals
More sockets where people actually work and sleep, so a tangle of extension leads isn’t the answer.
Does your job need a new circuit?
An extra socket in a bedroom or lounge
Not if the circuit can take it
An outdoor socket for the garden
Often not, but it must have RCD protection
A new electric shower
Yes, its own circuit
A full-size induction hob or range cooker
Usually its own circuit
A hard-wired hot tub
Yes, with an RCD and an isolator
A garden room, office or workshop
Yes, usually in armoured cable
Any new circuit needs a spare way on your fuse board, or room for one. If yours is full or has no RCD protection, we’ll explain the options before quoting.
From plan to power
How a new circuit is installed
1
Tell us the job
Call or use the form. Appliance details help.
2
Site visit
We check the board, supply and cable route.
3
Written quote
Circuit, cable and finish priced in full.
4
Run the cable
Neatly, by the safest route we can find.
5
Connect and test
Wired in, then tested before it’s switched on.
6
Certify
Paperwork sent, and the work notified if needed.
How long it takes
Set at the survey
An extra socket is quick; a cable run to the bottom of the garden takes longer. You’ll know before a date is booked.
Help us prepare
✓
Have the model number or manual for the new appliance to hand.
✓
Mark roughly where you want sockets, switches or the isolator.
✓
Clear a path to the fuse board, and to the loft or under the stairs if cables go that way.
✓
For outdoor work, move pots, bins and furniture off the cable route.
✓
Ask your hot tub or shower supplier what power rating it needs.
✓
Expect a short power cut while the new circuit is connected.
Before we add anything
A new appliance can only draw what your home can supply. At the visit we look at:
✓
What’s already running, the shower, oven and other heavy loads sharing your supply
✓
Spare ways on the board, and whether the new circuit can have RCD protection
✓
The existing circuit, if we’re extending it, and whether it can take another socket
✓
The cable route, through floors, walls or across the garden
✓
The appliance, its power rating and the maker’s wiring instructions
✓
Where you’ll switch it off, so the isolator or switch is easy to reach
If a plug-in option is safe and enough for what you need, we’ll say so. Not every appliance needs a new circuit.
Why choose AEI
✓
NAPIT approved, so our work is checked and our electricians are qualified
✓
Over 10 years’ experience with domestic and commercial electrics
✓
£2 million public liability insurance
✓
Local to you. We’re based in Worcester Park, KT4, so most jobs are a short drive away
✓
Honest quotes. We only quote for the work that actually needs doing
✓
One team for everything. All our work and parts are guaranteed
✓
5.0 on Google from 100+ reviews
No surprises
Quoted in writing first
The cost depends on the cable run, whether a new circuit is needed, what your fuse board can take, and the switches or sockets you choose. After the visit you get a free written quote, so you can see the whole job before deciding.
Before we begin
Free quote
On the quote
Every part
New circuits
Certified
All our work
Guaranteed
Add, spur, new circuit or board?
After the visit, most jobs fit one of these four. You’ll know which before you agree to anything.
We pick the simplest option that’s safe, not the biggest job.
Add
Extend a circuit
Extra sockets added to a circuit that has spare capacity and RCD protection.
Spur
Fused spur
A fused connection for one smaller fixed appliance, such as a cooker hood or extractor fan.
New
New circuit
A dedicated cable from the fuse board for a shower, hob, hot tub or outbuilding.
Board
Fuse board first
No spare way, or no RCD protection. The board needs sorting before anything new goes on.
Outdoor power rules
Safety rules for sockets and outdoor power
The wiring regulations (BS 7671) set out how sockets and outdoor supplies must be protected. These four come up most on this kind of work.
Wiring rules
BS 7671
30mA
RCD protection for sockets and outdoor kit
2 m
Sockets and isolators kept back from a hot tub
50 mm
Wall cables buried this shallow need RCD cover
SWA
Armoured cable for supplies run outdoors
An RCD is what cuts the power if a cable is nicked or water gets in. If an older circuit doesn’t have one, we’ll tell you before adding anything new to it.
Garden rooms
Power to the garden room?
Summerhouses, garden offices and workshops need a proper supply, not an extension lead through the window. Here’s how we approach it:
✓
We work out what you’ll run out there before sizing the cable
✓
Armoured cable, buried or fixed where it won’t get damaged
✓
Its own circuit and RCD protection, or a small board in the room
✓
Sockets, switches and an outdoor socket on the way, if you want one
✓
Tested and notified, with the certificate for your records
“The guys did a great job, everything working as expected with neat trunking of wires making our garden office look amazing. Great communication throughout the process and reasonably priced.”
Anthony Edralin, customer review
Kitchens
New cooker or induction hob?
Most full-size induction hobs and range cookers draw far more than a 13A plug can supply, so they’re wired to a circuit of their own with a cooker switch you can reach. Some smaller hobs are made to plug in; the label tells you which.
Changing from gas? Tell us the model before the worktop is cut, and we’ll check the board and cable route while there’s still time to plan it.
“Set up an electrical connection for our new induction hob. Job was done efficiently with no problems. Would use again.”
Colin Blunden, customer review
What people say once the job’s done
5.0
from 100+ Google reviews
“Great team, got on with job, professional yet friendly. Stuck to time frames. Very happy and will be using again. In fact have booked additional work already.”
Lorraine Winder, customer review
“Professional, quick, helpful by going the extra mile, explaining in non jargon what is required. A company who actually does what they say without any hassle!”
Sara Douglas, customer review
We turn up when we say.
It’s the thing our customers mention most. Read what people across Worcester Park and Surrey say.
Related services
Other work that often comes with it
No spare way?
Fuse board upgrades
A modern board with space for the circuit you’re adding.
Learn more →
Lights for the garden too?
Lighting installations
Path, patio and garden room lighting, made for the weather.
Learn more →
Charging at home?
EV charge points
A charger on its own circuit, with your supply checked first.
Learn more →
Local coverage
New circuits across Worcester Park, Sutton and Surrey
From hob connections in Cheam to garden offices in Banstead and Tadworth, we add circuits and sockets across South London and Surrey. Being based in KT4 means a survey is easy to fit in.
Worcester Park
KT4 · our base
Sutton
SM1, SM2
Cheam
SM2, SM3
New Malden
KT3
Epsom
KT17 to KT19
Ewell
KT17, KT19
Banstead
SM7
Wallington
SM6
Tadworth and Kingswood
KT20
Not listed? We cover most of South London and Surrey. Call to check.
New circuit questions people ask us
Straight answers. If yours isn’t here, call and ask.
Need a quick answer?
Call 07914 615151
How much does a new circuit cost?
It depends on the distance from the fuse board, the cable and protection the appliance needs, and whether the board has a spare way. After a visit we send a free written quote covering the whole job.
Can I add a socket without a new circuit?
Often, yes. If an existing circuit has the capacity and RCD protection, an extra socket can usually be added to it. We check the circuit first, as some older ones can’t safely take more.
Does an electric shower need its own circuit?
Yes. Electric showers are usually rated between about 7.5 and 10.8 kW, more than any shared circuit can carry. Going up in power can mean a thicker cable and a bigger breaker, so we check the existing wiring before you buy.
Can an induction hob plug into a normal socket?
Only if the maker says so. Some are built to stay within 13A, but most full-size induction hobs need their own circuit, usually through a cooker switch. The installation guide tells you which yours is.
What does a hot tub need electrically?
A hard-wired hot tub needs its own circuit, RCD protection, armoured or protected cable, and an isolator at least 2 metres from the water. Plug-in tubs need an RCD-protected outdoor socket the same distance away, and most makers advise against extension leads.
Do I need building control for an outdoor socket?
In England, not if it’s added to an existing circuit. A new circuit to the garden, or out to a shed or garden room, does have to be notified. We sort the notification as part of the job, so there’s nothing for you to send.
How deep does a garden room cable need to be?
The regulations don’t set one fixed depth: the cable has to be buried deep enough, or protected well enough, that digging won’t reach it. Armoured cable is the norm, and we agree the route with you first.
Are USB sockets safe?
Yes, when they’re from a reputable brand and fitted properly. They’re a tidy way to cut down on plug-in chargers, and they can replace ordinary sockets or go in as new ones.
Can you wire an electric gate?
We can run the power supply out to a gate motor in armoured cable, with a switch to isolate it. If someone else is fitting the gate and motor, tell us who and we’ll plan around them.
Why not just use an extension lead?
An extension lead doesn’t add any power. It shares one socket’s worth between everything plugged into it, and overloading or daisy-chaining leads is a common cause of overheating. If you rely on them every day, a few extra sockets are the safer fix.
Get a quote for your new circuit
Tell us what you’re adding, the appliance’s power rating if you have it, and where it’s going. A photo of your fuse board and the spot you have in mind helps us quote accurately.
Mon–Fri 7 am–7 pm · Sat–Sun 9 am–2 pm. AEI Electrical, Worcester Park, KT4.