Skip to main content

AEI Electrical

Electric heating · NAPIT approved · Worcester Park, KT4

Electric heating installation in Worcester Park

No gas supply, a cold extension, or storage heaters that give up by teatime? We fit electric radiators, modern storage heaters, electric boilers and underfloor heating for homes, flats and businesses in Worcester Park, Cheam, Sutton, Ewell and Wallington.

✓ Free quote

✓ Radiators, boilers, underfloor

✓ Fully certified

Qualified, insured and close by

AEI Electrical is run by Matthew Ayley, with Taylor on the team. In more than ten years of domestic and commercial work across South London and Surrey, we’ve wired in everything from a replacement pair of electric radiators to heating for homes with no gas supply.

NAPIT approved

Qualified inspectors

£2m insured

Public liability cover

5.0 on Google

100+ reviews

Based in Worcester Park

10+ years’ experience

What it is

What is electric heating?

Electric heating turns electricity straight into warmth, with no gas pipe, flue or oil tank. It comes in four main forms: panel radiators on the wall, storage heaters that charge up overnight, underfloor heating under the floor, and an electric boiler that runs a normal radiator system.

Each one needs the right supply behind it. A small panel heater can often be wired from a nearby circuit, but storage heaters, larger underfloor systems and electric boilers usually need their own circuits from the fuse board, and new circuits must be registered with building control.

Electric heaters turn almost all the electricity they use into heat in the room. That isn’t the same as cheap to run: per unit, electricity costs about three times as much as mains gas, so good controls and the right tariff matter.

What you get

Warm rooms, proper controls

You get heaters suited to the rooms they’re in, wired on safe circuits with RCD protection, and timers and thermostats set so the heating runs when you need it, not all day.

Every circuit we add or alter is tested before we leave. You receive an Electrical Installation Certificate, and new circuits are registered with building control on your behalf.

1

Assess

2

Install

3

Warm up

Time to rethink?

Signs it’s time to change your heating

Storage heaters cold by evening

Older models lose their stored heat long before bedtime.

No gas in the building

Flats and conversions where gas was never an option.

A portable heater in every room

Plug-in heaters carried from room to room all winter.

Heaters with just an on/off switch

No timer or thermostat, so they run whether you’re in or not.

An electric boiler on its way out

Breakdowns, odd noises or controls that no longer respond.

Freezing bathroom tiles

Hard floors that are cold underfoot every morning.

Whose homes suit electric heating?

Electric heating makes most sense where there’s no gas, or where extending the gas system isn’t worth it. That usually means one of these.

Flats with no gas

Plenty of blocks and conversions never had a gas supply, so the choice is between storage heaters, panel radiators or an electric boiler.

Extensions, lofts and garden rooms

Running new pipework from the boiler can be messy and costly. Electric heaters in the new space are often the simpler answer.

Landlords

Worn-out storage heaters replaced with modern ones that have clear, programmable controls tenants can actually use.

Bathroom and kitchen makeovers

Underfloor heating goes down before the tiles, so it needs deciding early in the project.

Which electric heating suits which space?

A home with no gas and radiators you want to keep

Electric boiler

A flat on an off-peak tariff

Modern storage heaters

A single room, loft or extension

Electric panel radiators

A bathroom or kitchen with a tiled floor

Underfloor heating

A garden room or home office

A panel heater on a timer

These are starting points, not rules. Insulation, when you’re at home and your electricity tariff all change the answer, so we talk it through before recommending anything.

From cold room to warm room

How an electric heating installation works

1

Describe your home

Call or use the form. Tell us which rooms feel cold.

2

Home visit

We look at the rooms, fuse board and supply.

3

Clear quote

Heaters, circuits and controls priced in writing.

4

Install

Heaters fixed, cables run, circuits connected.

5

Safety tests

Every new circuit tested before it’s switched on.

6

Set the controls

Timers and thermostats set to suit your week.

How long it takes

Given at the visit

Swapping a radiator is quick; a new boiler circuit or a whole flat takes longer. You’ll have the timing before any work is booked.

Before we start work

✓

Clear furniture away from the walls where heaters will go.

✓

Make sure we can reach the fuse board, meter and loft.

✓

Dig out any manuals or model numbers for your old heaters.

✓

Check your bill to see if you’re on Economy 7 or another off-peak tariff.

✓

Think about which rooms you use most, and at what times.

✓

There’ll be short spells without power while new circuits go in.

Before we choose your heating

The right heater depends as much on your home as on the heater itself. At the visit we look at:

✓

Your supply, the main fuse, and what already draws heavy power, like a shower or oven

✓

The fuse board, for spare ways and RCD protection for new circuits

✓

Each room, its size, windows, insulation and how fast it loses heat

✓

Your tariff, single rate or off-peak, which decides whether storage heaters make sense

✓

Existing heating, old heaters, the wiring that feeds them, and any boiler being replaced

✓

Your routine, who’s home and when, so the timers fit your day

If draughts or missing insulation are the real problem, we’ll tell you. A bigger heater won’t fix a room that leaks warmth.

Why choose AEI

✓

NAPIT approved, so our work is checked and our electricians are qualified

✓

Over 10 years’ experience with domestic and commercial electrics

✓

£2 million public liability insurance

✓

Local to you. We’re based in Worcester Park, KT4, so most jobs are a short drive away

✓

Honest quotes. We only quote for the work that actually needs doing

✓

One team for everything. All our work and parts are guaranteed

✓

5.0 on Google from 100+ reviews

No surprises

Costed before we begin

What you pay depends on the type and number of heaters, whether new circuits are needed, and whether your fuse board or supply needs work first. After the visit you get a free written quote listing each heater, circuit and control, so nothing is left to guess.

Before we begin

Free quote

On your quote

Every heater

When it’s done

Certificate

All our work

Guaranteed

Panel, storage, floor or boiler?

Each type of electric heating has a job it does best. Here’s the short version.

Plenty of homes mix them, such as storage heaters for background warmth with a panel heater for evenings.

Panel

Panel radiators

Warm up in minutes and suit rooms used at set times. They run on whatever rate you pay during the day.

Store

Storage heaters

Charge on cheaper night-rate electricity and give the heat out the next day. Best with an off-peak tariff.

Floor

Underfloor heating

Even warmth with nothing on the walls. Ideal under tiles; thick carpet holds the heat back.

Boiler

Electric boiler

Heats a wet radiator system with no gas or flue. A big load, so your supply and fuse board are checked first.

Built-in controls

What every new electric heater must have

Since January 2018, fixed electric heaters made for sale in the UK have had to meet Ecodesign rules, often called Lot 20. In practice that means these controls.

Required since

Jan 2018

Thermostat

Electronic control of the room temperature

Timer

Heating times set for every day of the week

Open window

Cuts back when an open window drops the heat

Adaptive start

Learns when to switch on so you wake up warm

Every new heater needs the first two, plus at least one of the other two. Older heaters with just a dial can stay in use, but swapping them is one of the easiest ways to stop heating empty rooms.

Replacing heaters

Swapping old electric heaters?

Many flats and houses here still rely on heaters fitted decades ago. Replacing them is usually straightforward, and it’s the quickest way to better control:

✓

Off-peak supply and tariff checked before storage heaters are swapped

✓

Each new heater matched to the room it’s heating

✓

Existing wiring tested before it’s reused

✓

Old heaters disconnected safely

✓

Timers and thermostats explained before we leave

“I booked AEI Electrical to replace two electric radiators, change a fan in the bathroom, stop my dimmable lights flashing and swap some light fittings. Matthew and Taylor were brilliant.”

Paul, customer review

New spaces

Heating an extension or garden room?

Running new pipes from a gas boiler to an extension, loft or garden room can be disruptive, and the boiler may not have the capacity to spare. Electric panel heaters or underfloor heating on their own circuit avoid both problems.

It’s easiest to plan the heating with the rest of the electrics, before plastering or flooring. Good controls mean the room is warm when you use it and off when you don’t.

What our customers notice

5.0

from 100+ Google reviews

“Matthew and Taylor carried out an EICR inspection for me. They then completed the minor issues they found at a good price and within a quick timescale. Both were friendly, courteous and tidy.”

Joy Brosnan, Google review

“Matt and his team were extremely helpful. Turned up on time. Done the job within the time limit and to the agreed price which wss very reasonable. Highly recommend!”

Stefan Zoev, customer review

We turn up when we say.

It’s the thing our customers mention most. Read what people across Worcester Park and Surrey say.

Local coverage

Electric heating across Worcester Park, Sutton and Surrey

From flats in Sutton and Wallington to family homes in Cheam and Ewell, we install electric heating across South London and Surrey. Being based in KT4 makes a home visit easy to arrange.

Not listed? We cover most of South London and Surrey. Call to check.

Electric heating questions people ask us

Straight answers. If yours isn’t here, call and ask.

Need a quick answer?

Call 07914 615151

How much does electric heating installation cost?

It depends on how many heaters you need, which type you choose, and whether new circuits, a fuse board upgrade or a bigger supply are involved. After a home visit, we send a free written quote that lists each part of the job.

Is electric heating expensive to run?

Per unit, electricity costs about three times as much as mains gas, so if you have gas, heating with electricity usually costs more. Good controls, decent insulation and an off-peak tariff for storage heaters all help. We’ll never claim it’s cheaper than it is.

Are electric radiators better than storage heaters?

They suit different homes. Storage heaters charge on cheaper night-rate electricity and suit people who are home in the day. Panel radiators heat up when you ask, at the normal rate, so they suit rooms used at set times. Plenty of homes use both.

Will my supply cope with an electric boiler?

It might. An electric boiler can draw as much power as an electric shower, but for hours at a time, so we check your main fuse, fuse board and other heavy loads first. Some homes need a bigger supply from the network operator before it can go in.

Can underfloor heating go under any floor?

It works best under tiles and stone. Many systems also suit laminate, vinyl and engineered wood, and some suit carpet as long as the carpet and underlay aren’t too thick (makers usually set a limit of about 2.5 tog combined). We match the system to your floor.

Is underfloor heating safe in a bathroom?

Yes, when it’s installed properly. The circuit needs 30mA RCD protection and a thermostat that limits the floor temperature, and work around a bath or shower must be registered with building control. We take care of that.

Do I need building control for electric heating?

In England, any new circuit, such as one for an electric boiler, storage heaters or underfloor heating, must be registered with building control, and so must work around a bath or shower. Being NAPIT approved, we can register it ourselves, and you receive the certificate.

Do you install heat pumps?

A heat pump is as much a plumbing and heating job as an electrical one, and the government’s Boiler Upgrade Scheme grant (£7,500 for most air and ground source heat pumps in England and Wales) is only paid through an MCS-certified installer. Ask us before you book and we’ll tell you how we can help.

Are gas boilers being banned?

Not in existing homes. The Future Homes Standard starts to apply to new homes in England from 24 March 2027, and its carbon targets effectively rule out gas boilers in them. If you already have gas, you can still replace your boiler.

Do you fit electric heating for landlords and businesses?

Yes. We fit and replace electric heating in rental homes, offices and shops as well as owner-occupied homes, and the gap between tenancies is a good time to swap tired storage heaters. Work and parts come with our guarantee.

Talk to us about your heating

Tell us which rooms you want to heat, what heating you have now and whether there’s gas in the building. A photo of your fuse board and existing heaters helps us prepare for the visit.

07914 615151

info@aeielectrical.com

Mon–Fri 7 am–7 pm · Sat–Sun 9 am–2 pm. AEI Electrical, Worcester Park, KT4.